Newland NLS-EM3095, User Manual

Page: 54 / 140

44
Continuous Mode
Continuous Mode : The engine automatically activates a decode session. The decode session continues
until the barcode is decoded or the decode session timeout expires. When a decode session is
completed, the engine waits until the timeout between decodes expires and then starts next session. The
engine continues to work in this pattern if the following situation does not happen: no barcode is
presented to the engine or passed in front of it in a decode session, the engine will automatically suspend
barcode reading. Pressing the trigger can suspend/resume barcode reading.
Continuous Mode
Decode Session Timeout
This parameter sets the maximum time decode session continues during a scan attempt. It is
programmable in 0.1s increments from 0.1s to 25.5s. The default timeout is 5.0s. If the parameter is set to
0, the engine scans and decodes barcode continuously. To learn how to program this parameter, see
Appendix E: Parameter Programming Examples .
Decode Session Timeout