Newland NLS-EM2045 Series, User Manual

Page: 72 / 140

Enter Setup
**
Exit Setup 60
Check Digit Verification
A check digit is optional for Interleaved 2 o 5 and can be added as the last digit. It is a calculated value
used to verify the integrity of the data.
Disable: The engine transmits Interleaved 2 of 5 barcodes as is.
Do Not Transmit Check Digit After Verification: The engine checks the integrity of all Interleaved 2 of
5 barcodes to verify that the data complies with the check digit algorithm. Barcodes passing the check
will be transmitted except the last digit, whereas those failing it will not be transmitted.
Transmit Check Digit After Verification: The engine checks the integrity of all Interleaved 2 of 5
barcodes to verify that the data complies with the check digit algorithm. Barcodes passing the check will
be transmitted, whereas those failing it will not be transmitted.
** Disable
Do Not Transmit Check Digit After Verification Transmit Check Digit After Verification
Note: If the Do Not Transmit Check Digit After Verification option is enabled, Interleaved 2 of 5
barcodes with a length that is less than the configured minimum length after having the check digit
excluded will not be decoded. (For example, when the Do Not Transmit Check Digit After Verification
option is enabled and the minimum length is set to 4, Interleaved 2 of 5 barcodes with a total length of 4
characters including the check digit cannot be read.)