Enter Setup
55
**
Exit Setup
Add-On Code
A UPC-E barcode can be augmented with a two-digit or five-digit add-on code to form a new one.
Enable 2-Digit Add-On Code
**
Disable 2-Digit Add-On Code
Enable 5-Digit Add-On Code
**
Disable 5-Digit Add-On Code
Enable 2-Digit Add-On Code/ Enable 5-Digit Add-On Code:
The engine decodes a mix of UPC-E
barcodes with and without 2-digit/5-digit add-on codes.
Disable 2-Digit Add-On Code/ Disable 5-Digit Add-On Code:
The engine decodes UPC-E and
ignores the add-on code when presented with a UPC-E plus add-on barcode. It can also decode UPC-E
barcodes without add-on codes.
Transmit System Character “0”
The first character of UPC-
E barcode is the system character “0”.
Transmit System Character “0”
**
Do Not Transmit System Character “0”
Summary of Contents for NLS-EM2045 Series
