17
Chapter 3 Electrical Specifications
Power Supply
Do not power up the EM2037 until it is properly connected. Be sure the power is cut off before connecting a cable to or
disconnecting a cable from the host interface connector. Hot-plugging could damage the engine.
Unstable power supply or sharp voltage drops or unreasonably short interval between power-ons may lead to unstable
performance of the engine. Do not resupply the power immediately after cutting it off.
Ripple Noise
To ensure the image quality, a power supply with low ripple noise is needed.
Acceptable ripple range (peak-to-peak) :
≤
80mV
DC Characteristics
Operating Voltage / Current
Table 3-1
T=23°C
Parameter
Description
Minimum
Typical
Maximum
Unit
Operating Voltage
VIN
(12-pin FPC Connector)
3.0
3.3
5.5
V
VIN
(5-pin box Connector)
4.5
5.0
5.5
V
Current (@5.0V)
Operating Current
-
276.6
332.3
mA
Standby Current
-
57.4
-
mA
Current (@3.3V)
Operating Current
-
400.8
498.6
mA
Standby Current
-
80.5
-
mA
