Newland NLS-BS80 User Manual Download Page 50

Page: 50 / 264

Code Page

The

Code Page

programming feature is provided to support more international characters. This feature is

only effective when ASCII characters are sent in the ALT+Keypad way.

Windows 1252 (Latin I) (default)

Windows 1251 (Cyrillic)

Example 1:

Set the scanner to get proper output for Russian encoded with ISO-8859-1

1. Scan the

Windows 1251 (Cyrillic)

barcode.

2. Scan the

Mode 3

barcode from

the “Emulate ALT+Keypad” section in this chapter.

3. Scan the

ISO-8859-1

barcode from the

“Character Encoding” section in this chapter.

Example 2:

Set the scanner to get proper output for Russian encoded with UTF-8

1. Scan the

Windows 1251 (Cyrillic)

barcode.

2. Scan the

Mode 3

barcode from

the “Emulate ALT+Keypad” section in this chapter.

3. Scan the

UTF-8

barcode from the

“Character Encoding” section in this chapter.

Summary of Contents for NLS-BS80









































































































































































































































































Search results

Summary of Contents for NLS-BS80

Reviews:

Related manuals for NLS-BS80

Brands by name

Popular brands

Newland NLS-BS80, User Manual

Search results

Summary of Contents for NLS-BS80

Reviews:

Related manuals for NLS-BS80

Brands by name

Popular brands