Newland NLS-BS80 User Manual Download Page 249

Page: 249 / 264

233

Save/Cancel Barcodes (1D Scanner)

After reading numeric barcode(s), you need to scan the

Save

barcode to save the data. If you scan the

wrong digit(s), you can either scan the

Cancel

barcode and then start the configuration all over again, or

scan the

Delete the Last Digit

barcode

and then

the correct digit, or scan the

Delete All Digits

barcode

and then the digits you want.

For instance, after reading the

Set the

Maximum Length

barcode and numeric barcodes

“1”, “2” and “3”,

you scan:



Delete the Last Digit:

The last digit “3” will be removed.



Delete All Digits:

All digits “123” will be removed.



Cancel:

The maximum length configuration will be canceled.

Save

Cancel

Delete the Last Digit

Delete All Digits

Summary of Contents for NLS-BS80









































































































































































































































































Search results

Summary of Contents for NLS-BS80

Reviews:

Related manuals for NLS-BS80

Brands by name

Popular brands

Newland NLS-BS80, User Manual

Search results

Summary of Contents for NLS-BS80

Reviews:

Related manuals for NLS-BS80

Brands by name

Popular brands