** Enter Setup
75
Exit Setup
Set Length Range for AIM 128
The scanner can be configured to only decode AIM 128 barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum
lengths.
If minimum length is set to be greater than maximum length, the scanner only decodes AIM 128 barcodes
with either the minimum or maximum length. If minimum length is same as maximum length, only AIM
128 barcodes with that length are to be decoded.
Set the Minimum Length
Set the Maximum Length
Example: Set the scanner to decode AIM 128 barcodes containing between 8 and 12 characters
1. Scan the
Enter Setup
barcode.
2. Scan the
Set the Minimum Length
barcode.
3. Scan the numeric barcode “8” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save
barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the
Set the Maximum Length
barcode.
6. Scan the numeric barcodes “1” and “2” from the “Digit Barcodes” section in Appendix.
7. Scan the
Save
barcode from the “Save/Cancel Barcodes” section in Appendix.
8. Scan the
Exit Setup
barcode.
Summary of Contents for HR11+ Aringa
