Newland HR11+ Aringa, User Manual, Page: 73 / 193

** Enter Setup
61 Exit Setup
Chapter 5 Prefix & Suffix
Introduction
In real applications, barcode data may be found insufficient for your needs. You may wish to include
additional information such as barcode type, data acquisition time or delimiter in data being scanned.
Adding extra information to printed barcodes does not seem like a sensible solution since that will
increase the barcode size and make them inflexible. Instead, we come up with the idea of appending
prefix and suffix to the data without making any change to barcodes. We will show you how to conduct the
configuration in this chapter.
Note: Customized data: <Prefix> <Data><Suffix><Terminating Character>
Prefix Sequence
** Code ID+AIM ID Code ID+AIM ID
Custom Prefix
Enable/Disable Custom Prefix
If custom prefix is enabled, you are allowed to append to scanned data a user-defined prefix that cannot
exceed 11 characters.
For example, if barcode data is “123” and custom prefix is “AB”, the host device will receive “AB123”.
** Disable Custom Prefix Enable Custom Prefix