** Enter Setup
Exit Setup
152
EA Move the cursor to the end
Syntax
＝
EA
Move the cursor to the last character in the input message.
Search Commands
F8 Search forward for a character
Syntax
＝
F8xx (xx: The search character’s hex value)
Search the input message forward for “xx” character from the current cursor position, leaving the cursor
pointing to the “xx” character.
F8 Example: Send barcode data that starts after a particular character
Search for the letter “D” in barcodes and send all the data that follows, including the “D”. Using the
barcode above:
Command string:
F844F10D
F8 is the “Search forward for a character” command
44 is the hex value for “D”
F1 is the “Send all characters” command
0D is the hex value for a CR
The data is output as:
DEFGHIJ
<CR>
F9 Search backward for a character
Syntax
＝
F9xx (xx: The search character’s hex value)
Search the input message backward for “xx” character from the current cursor position, leaving the cursor
pointing to the “xx” character.
Summary of Contents for HR11+ Aringa
