** Enter Setup
135
Exit Setup
Check Character Verification
Check characters are optional for MSI-Plessey and can be added as the last one or two characters, which
are calculated values used to verify the integrity of the data.
If the
Disable
option is enabled, the scanner transmits MSI-Plessey barcodes as is.
Disable
**
One Check Character,
MOD10
Two Check Characters,
MOD10/MOD10
Two Check Characters,
MOD10/MOD11
**
Do Not Transmit Check Character
Transmit Check Character
Note:
If you select a check character algorithm and the
Do Not Transmit Check Character
option,
MSI-Plessey barcodes with a length that is less than the configured minimum length after having the
check character(s) excluded will not be decoded. (For example, when the
One Check Character,
MOD10
and
Do Not Transmit Check Character
options are enabled and the minimum length is set to 4,
MSI-Plessey barcodes with a total length of 4 characters including the check character cannot be read.)
Summary of Contents for HR11+ Aringa
