Newland BS8050-2V Piranha, User Manual

Page: 12 / 52

6
Connecting the BS80 to Smartphone/Tablet
1. Make sure your device has HID or SPP profile.
2. Turn off the Power-Saving mode on your smartphone/tablet first. If the red Function LED on the
scanner illuminates, hold down the Scan/Power button and Function button at the same time for 3
seconds or scan the barcode below to switch to the Real-Time mode.
Real-Time Mode (Default)
3. Scan the appropriate barcode below to choose HID or SPP profile before connecting the scanner to
smartphone/tablet. If you don
’t know what profile your device is using, please try HID profile first, then
SPP profile.
HID (Default)
SPP
4. Complete the following connection procedure (example: pairing with iPhone). If the BS80 does not
appear in the search results in step (5), you may need to delete existing pairing information on the
scanner by holding down the Function button on the scanner for 8 seconds (see Functions of the
Buttons in this chapter) or by scanning the Delete Bluetooth Pairing barcode (see Delete Bluetooth
Pairing in Chapter 2).