70
Check Digit Verification
Disable
(default)
Transmit Check Digit After Verification
Do Not Transmit Check Digit After Verification
Set Length Range for Industrial 25
The scanner can be configured to only decode Industrial 25 barcodes with lengths that fall between
(inclusive) the minimum and maximum lengths. To accomplish it, you need to set the minimum and
maximum lengths.
If minimum length is set to be greater than maximum length, the scanner only decodes Industrial 25
barcodes with either the minimum or maximum length. If minimum length is same as maximum length,
only Industrial 25 barcodes with that length are to be decoded.
Set the Minimum Length
Set the Maximum Length
Example: Set the scanner to decode Industrial 25 barcodes containing between 8 and 12
characters
1. Scan the
Set the Minimum Length
barcode.
2. Scan the numeric
barcode “8” from the “
Digit Barcodes (1D Scanner)
” section in Appendix.
3. Scan the
Save
barcode from
the “
Save/Cancel Barcodes (1D Scanner)
” section in Appendix.
4. Scan the
Set the Maximum Length
barcode.
5. Scan the numeric barcodes
“1” and “2” from the “
Digit Barcodes (1D Scanner)
” section in Appendix.
6. Scan the
Save
barcode from
the “
Save/Cancel Barcodes (1D Scanner)
” section in Appendix.
Summary of Contents for BS-80
