Newland BS-80 Page 71 User Manual Download

Page: 71 / 172

ITF-6

ITF-6 is a special kind of Interleaved 2 of 5 with a length of 6 characters and the last character as the

check character.

Restore the Factory Defaults of ITF-6

Disable ITF-6 (default)

Enable ITF-6, Do Not Transmit Check Digit

Enable ITF-6, Transmit Check Digit

Note:

It is advisable not to enable ITF-6 and Interleaved 2 of 5 at the same time.

Set Code ID

To set the Code ID, scan the

Set Code ID

barcode, the numeric barcodes corresponding to the

hexadecimal value of a desired ID and the

Save

barcode.

Set Code ID

Example: Set the Code ID of ITF-6

to “p” (Hex: 0x70)

1. Scan the

Set Code ID

barcode.

2. Scan the numeric

barcodes “7” and “0” from the “

Digit Barcodes (1D Scanner)

” section in Appendix.

3. Scan the

Save

barcode from

the “

Save/Cancel Barcodes (1D Scanner)

” section in Appendix.

Summary of Contents for BS-80













































































































































































Search results

Summary of Contents for BS-80

Reviews:

Related manuals for BS-80

Brands by name

Popular brands

Newland BS-80, User Manual

Search results

Summary of Contents for BS-80

Reviews:

Related manuals for BS-80

Brands by name

Popular brands