DRAFT
33
RHINO
™
6000+
User Guide
Safety Precautions for Rechargeable Battery
Battery type:
LiPolymer 7.4V 1400mAh 10.36Wh
Inaccurate handling of a lithium-ion polymer rechargeable battery may cause
leakage, heat, smoke, an explosion, or fire. This could cause deterioration of
performance or failure. This may also damage the protection device installed in the
battery. This could damage equipment or injure users. Thoroughly follow the
instructions below.
Danger
Use the battery only in the Rhino 6000+ label printer.
Battery can only be charged while inserted in the label printer using the
charging adapter provided (9VDC/2A).
Do not connect directly to an electric outlet or cigarette lighter charger.
Do not store battery close to fire or inside the car where temperature may be
over 60°C.
Warning
Stop charging the battery if charging is not completed within 3.5 hours.
Caution
Do not use the label printer or battery in a place that generates static
electricity.
Use the label printer only at room temperature.
Battery can only be charged 10°C to 35°C temperature range.
Battery can only be discharged within -10°C to 60°C temperature range.
Use only an authentic DYMO battery.
Electrical Rating
Printer
Input: 9V, 2.0A
Power adapter
Input: 100-240V 50/60Hz 0.6A
Output: 9V, 2.0A
