newell DYMO RHINO 6000+, User Manual

Page: 24 / 41

DRAFT
20
RHINO
™
6000+
User Guide
Creating Heat-Shrink Labels
The heat-shrink tube label is one of several cable management specific labels.
Heat shrink tube labels can be printed on any continuous Heat-Shrink Tube labels.
The label properties you can set are:
To create a heat-shrink label
1
Press CABLE.
2
Select Heat-Shrink and press OK .
3
Select the properties desired.
4
Select Done (ESC) to create the label.
5
Enter the text for the label and press PRINT .
To create multiple labels quickly, see Creating a Series of Labels on page 12.
Creating a Patch Panel Label
A Patch panel label allows you to label a row of ports on a patch panel. You select
the properties for the label, enter the desired text, and print. The result is a long
label with multiple, evenly spaced text for each port.
Use serialization to automatically populate the ports. When all the ports are filled
on the current label, a new label is created. See
Creating a Series of Labels on
page 12.
The label properties you can set are:
Orientation
Landscape (Default)
Portrait
Changing the label orientation removes any content on the label,
creating a new blank label.
Label length Minimum: 1 1/4” (31.75 mm)
Maximum: 2” (508 mm)
Default: 2” (50.8 mm)
Label layout Show label outline -
Show label outline. Default is No.
Match/leader trailer - Blank space is equal at the beginning
and end of the label. Default is Yes.
# of ports
Maximum of 48 ports
Center to center
distance
Distance from the center of one port to the center of the
next port.
Minimum: 5/32” (3.8 mm)
Maximum: 20” (508 mm)
I n groups of Number of groups. Default is 1 group.
Group clearance
Distance between groups of ports when one continuous
label is selected.
Minimum: 1/64” (0.4 mm)
Maximum: 20” (508 mm)
!