Follow these steps to install your LabelManager 450D label maker and print your first label.
1. Unpacking your Label Maker
x
Do not connect the label maker to your computer until asked to do so during the software installation.
1
Unpack your label maker and save the packing materials.
2
Make sure you have all the items shown in Figure 1.
2. Connecting the Power
The label maker can operate on AC or battery power.
To connect the power adapter
1
Plug the power adapter into the power connector on the top, left side
of the label maker.
2
Plug the other end of the power adapter into a power outlet.
To insert the batteries
1
Remove the battery compartment cover. See Figure 2.
2
Insert the batteries following the polarity markings (+ and –).
3
Replace the battery compartment cover.
1,2...n
Enter
P
O
L
K
I
U
J
H
G
B
V
F
T
C
D
R
E
S
X
0
9
8
7
6
5
4
3
2
1
?
www.dymo.com
!
N
Clear
Cancel
CAPS
SPACE
&
–
+
,
=
/
,
Y
Shift
Shift
Language
Settings
Memory
Insert
Preview
Symbols
Figure 1
Warranty booklet
LabelManager 450D label maker
CD-ROM
D1 label cassette
Quick Start Guide
USB cable
User Guide
Power adapter
Figure 2
Quick Start
