Newcont NTP-6451 Owner'S Manual Download Page 1

OWNER'S MANUAL 

INSTALLATION AND 

OPERATING 

INSTRUCTIONS

PLEASE READ THIS 

MANUAL CAREFULLY                 

BEFORE USE.

KEEP FOR 

YOUR REFERENCE.

Digital 2.4GHz 
Expandable Cordless Telephone System 

NTP-6451 

NEWCONT

NEWCONT

1.This equipment has been tested and found to comply 
    with the limits for a class B digital device, pursuant
    to  part 15 of FCC Rules. These limits are designed to 
    provide reasonable protection against harmful inter
    -ference in a residential installation. This equipment
    generates, uses and can radiate radio frequency ener
   -gy and, if not installed and used in accordance with
   the instructions, may cause harmful interference to
  radio communications. However, there is no guar
  -antee that interference will not occur in a particular
  installation. If this equipment dose cause harmful in
  -terference to radio or television reception, which
  -can be determined by turning the equipment off 
  and on, the user is encouraged to try to correct the 
  interference by one or more of the following measures:
         -Reorient or relocate the receiving antenna.
         -Increase the separation between the equipment 
  and receiver.
         -Connect the equipment into an outlet on a circuit 
  different from that to which the receiver is connected.
         -Consult the dealer or an experienced radio/TV 
  technician for help.
2.Changes or modifications not expressly approved 
    by the party responsible for compliance could void
    the user's authority to operate the equipment.
3.Privacy of communications may not be ensured 
    when using this phone.

NOTE

Summary of Contents for NTP-6451









Reviews: