background image

 

20.  WARRANTY 

 

NEWCON OPTIK

 warrants this product against defects in 

material and workmanship for one year from the date of the 
original date of consumer's purchase, but no more than 18 months 
from the date of manufacturing.  Should your Newcon product 
prove defective during this period, please bring the product 
securely packaged in its original container or an equivalent, along 
with proof of the date of original purchase, to your Newcon 
Dealer.  Newcon will repair (or at its option replace), the product 
or part thereof, which, on inspection by Newcon, is found to be 
defective in materials or workmanship

 

 

What This 

Warranty Does Not Cover:

 

NEWCON

 is not responsible for warranty service should the 

product fail to be properly maintained or fail to function properly 
as a result of misuse, abuse, improper installation, neglect, damage 
caused by disasters such as fire, flood, lightning, improper 
electrical current, or service other than by a NEWCON Authorized 
Service. Postage, insurance, or shipping costs incurred in 
presenting your NEWCON product for warranty service are your 
responsibility. Please include a check or money order made out to 
NEWCON OPTIK for the amount of $15.00 to cover shipping and 
handling. This covers products shipped in USA or Canada only.

 

 

 

21. CUSTOMER SUPPORT 
 

Should you experience any difficulties with your Newcon 
OPTIK product, consult the enclosed manual. If the problem 
remains unresolved, contact our customer support department at 
(416) 663-6963 or Toll free at 1-877-398-6666.  Our operating 
hours are 9am-5pm, Monday - Friday, Standard East Time.  

 
At no time should equipment be sent back to Newcon without 
following the instructions of our technical support 
department.  
Newcon accepts no responsibility for unauthorized returns. 

 
 

To locate NEWCON Authorized Dealer call: 

Tel: (416) 663-6963 Fax: (416) 663-9065  

Email: [email protected]

 

INTERNET: http://WWW.NEWCON-OPTIK.COM 

The defective products should be shipped to: 

In USA: 3310 Prospect Ave. Cleveland, OH 44115 

In Canada: 1183 Finch Ave. W., Suite 302, Toronto, ON M3J 2G2 

From international:  

1183 Finch Ave. W., Suite 302, Toronto, ON M3J 2G2, CANADA 

 

Summary of Contents for LRB 20




























Reviews: