Newcential SP-52, Owner'S Manual, Page: 27 / 93

Ski- and snowboard helmet
GB GB
Ski- and snowboard helmet
28 29
Removing/attaching the ear padding (Fig. F)
1. First, pull the chinstrap out of the loops on the ear padding.
2. Carefully pull the ear padding straight out of the snap lock grooves.
3. Attach the ear padding by carefully pressing the tab at the base of the ear padding into
the groove on the side of the helmet. The soft side of the ear padding should face inward.
4. Thread the chinstrap back through the loops on the ear padding.
Operating the one-handed size adjustment system (Fig. E)
The integrated size adjustment system can be adjusted freely with a turning knob on the back
of the head:
• Smaller = turn clockwise • Larger = turn anticlockwise
The correct helmet position (Fig. H)
• The helmet must always sit horizontally on your head.
• If the helmet is too far forward, this can impair your vision.
• If the helmet is too far back, your forehead is not sufficiently protected.
Attaching the ski goggles (Fig. I)
1. To attach the ski goggles, open the flap at the back of the helmet.
2. Put the ski goggles in place and pull the band around the helmet.
3. If the helmet is too far back, your forehead is not sufficiently protected.
Setting the ventilation (Fig. J)
1. Push the adjuster back to open the air slots and increase ventilation.
2. Push the adjuster forward to close the air slots and reduce ventilation.