background image

A Name You can Trust 

OPERATING INSTRUCTIONS 

TEMPERATURE ADJUSTMENT 

1.

Thermostat

2.

Light Switch

3.

Led Light

Your beverage cooler can be set to your desired temperature. The unit’s 
temperature range is 34°F to 64°F (1°C to 18°C).  

The temperature scale runs from 1, the warmest setting, to 7, the coldest 
setting. The 0 position is an OFF setting which can be used when the beverage 
cooler is standing empty.  

Avoid setting the thermostat too high or the beverage cooler may be unable to 
achieve satisfactory cooling temperatures.  

OPTIMIZING PERFORMANCE 

To ensure maximum performance and efficiency, be sure to place your
beverage cooler in an area where there is proper air circulation.  (See
installation instructions above for proper clearances.)

For proper internal air circulation, do not overfill your beverage cooler.
When storing beverages, keep them away from the rear wall. To allow free
circulation of cold air, don’t pack beverages too tightly on the shelves.

Do not place the unit in direct sunlight.

Do not place heated beverages or food in your cooler.

Do not store perishable food in your beverage cooler. The unit’s interior
temperature may not be low enough to prevent spoilage.

Do not place heavy objects on top of the beverage cooler.

Summary of Contents for R-AB-850












Reviews: