Assembly & Care Guide
Karl-Johan Pendant
[email protected] Frederiksgade 1, Ground Floor, 1265 København DK www.newworks.dk
The Karl-Johan Pendant is carefully crafted, making every piece unique.
The use of natural materials means that differences in expression may occur, such as smaller marks and minor deviations.
SAFETY INSTRUCTIONS
Please read the instructions carefully and keep them for future reference. New Works Aps is not responsible for any
faults or damages caused by not following the instructions correctly.
Turn off electricity at the main circuit breaker panel before beginning the installation. Installation is to be carried out
only by a qualified electrician. It is important that all wires are connected - when unpacking the box, be careful not
to pull wires, as this may result in a bad connection.
This lamp must be permanently wired into the electric system. Different ceiling materials require different types of
fittings. Always choose screws and plugs that are suited to the ceiling material.
The lamp is only intended for indoor use. Consult a professionally qualified electrician if any doubt.
Follow the guidance 220-240V~ 50/60Hz - Small: Built in LED 7W / Large: Built in LED 7W.
The light source and lamp exterior may get hot after prolonged use.
Do not subject the lamp to any shock while lit as this may cause the lamp to break.
Keep the product out of children’s reach. Dispose of the packaging and do not allow children to play with it.
Do not modify the product in any way.
CLEANING
Turn off the electricity before cleaning the lamp. Wipe the lamp shade with a soft dry or damp cloth. Do not use
any abrasive cleaning tools, and never use strong cleaning agents such as household glass cleaner, white spirit or
turpentine.
MORE INFORMATION
For more information such as product overview, material description and disclaimers - please visit our website at
www.newworks.dk
. If you have any questions or comments, please do not hesitate to contact us at info@new-
works.dk.
