www.newrocktech.com
6-48
6
Localizing the System
This chapter describes the configuration of parameters which you need to modify according to your regional
preference, including time zone, country and area code, Caller ID detection mode, call progress tones and digit
map. It is important to set up these parameters correctly before you start using the device.
6.1 Setting the System Time
The time and time stamps are used in features and logs. The factory default time zone is
GMT+08:00 hours. You can make the change at
System tool > System time
.
6.2 Selecting the Caller ID Detection Mode to PSTN
Select the Caller ID detection mode according to the features of the peer switch. The default value is
Automatic
, which means that the device detects Caller ID in either
after ringing
or
before ringing
mode
automatically.
You can make the change at
Trunk > Analog trunk > Advanced > Call ID detection
