New lift FST-2, Manual, Page: 86 / 194

4 Technical data
4.8 RIO-ADM remote I/O module
84
FST-2_HB.EN12/05
4.8 RIO-ADM remote I/O module
The RIO-ADM remote I/O module provides 12 programmable inputs/
outputs at any position of the LON bus. The RIO-ADM is connected to the
FST-2 with the LON bus.
One controller can be equipped with up to six RIO-ADMs at different
locations.
Technical data
Number Description Ports
1 RIO-ADM 8 .. 19 Port [8] .. Port [19]
2 RIO-ADM 20 .. 31 Port [20] .. Port [31]
3 RIO-ADM 32 .. 43 Port [32] .. Port [43]
4 RIO-ADM 44 .. 55 Port [44] .. Port [55]
5 RIO-ADM 56 .. 67 Port [56] .. Port [67]
6 RIO-ADM 68 .. 79 Port [68] .. Port [79]
Description Value Unit
Supply voltage 24 ±10% V DC
Power consumption 50 mA
Max. switch-on current per output for
approx. 40 ms 600 mA
Outputs Excess load and short-circuit proof
Inputs/outputs Low-active
Length × width × height 54 × 50 × 17.5 (2 1/
8 × 2 × 11/16)
mm (inch)
Temperature range
Storage / transport -20 - +70 (-4 - +158) °C (°F)
Operation ±0 - +60 (32 - 140) °C (°F)
Relative humidity
Storage / transport 5 - 95 %
Operation 15 - 85 %