New lift FST-2, Manual, Page: 58 / 194

4 Technical data
4.3 FSM car control module
56
FST-2_HB.EN12/05
Jumpers JK1, JK2 and JK3 Assigning the car in group mode
If multiple FST-2-Controllers are combined with a GST Group Controller,
cars are assigned to an FST-2-Controller with jumpers JK1, JK2 and JK3.
Car assignments of the FSM car control module and the FPM car panel
module must be identical for each car.
Unused jumper
Not plugged:
J1 (service jumper)
Jumper J25 Shielding encoder cable X25
Jumper J25 connects the shielding of the rotation encoder cable X25 to the
potential PE or GND.
.
LEDs
Setting JK1 JK2 JK3
FST-2 A open open open
FST-2 B plugged open open
FST-2 C open plugged open
FST-2 D plugged plugged open
FST-2 E open open plugged
FST-2 F plugged open plugged
FST-2 G open plugged plugged
FST-2 H plugged plugged plugged
Function J25
Shielding of rotation encoder cable to ground (GND) 1-2
Shielding of rotation encoder cable to PE 2-3
LED Colou
r
State Description
LD1 green on Forced closing of door A (relay K1)
LD2 green on Alarm (relay K9)
LD3 green on Close door A (relay K2)
LD4 green on Car light ON (relay K10)
LD5 green on Open door A (relay K3)
LD6 green on Car ventilator ON (relay K11)
LD8 green on Cam B (relay K4)
LD9 green on Power 5V