New lift FST-2, Manual, Page: 171 / 194

6 Programmable inputs and outputs
FST-2_HB.EN12/05
169
Function “ramp drive”
The function “ramp drive” enables provision of the inputs required for a
ramp drive on the terminal of a programmable input/output.
A ramp drive enables controlled movements of the car in dead man control
in an extended door zone with the car doors fully open. This function
requires four inputs:
- Activate ramp drive
- Button UP (dead man)
- Button DOWN (dead man)
- Door limit switch UP of car door
Select menu item
MAIN MENU - Configuration - I\O
Configuration - I\O Ports - RAW
and select the input/output to
be parametrised (
S
+
£
).
Settings of the four inputs
Fig. 6.15 Functions of the separate bits of the RAW register
fixed pattern for
ramp drive
function number
function number: ramp drive ON
drive UP
drive DOWN
car door limit switch opened
Function
RAW
register
Activate ramp drive
000000D2
Ramp drive, button UP
000001D2
Ramp drive, button DOWN
000002D2
Ramp drive, door limit switch opened
000003D2