New lift FST-2, Manual, Page: 127 / 194

5 Menu tree
5.4 MAIN MENU – Config
FST-2_HB.EN12/05
125
Maximum loading time
The maximum loading time in seconds can be set in
Load Time-Max.
.
Load-Sw.Disp
FPM output “Display 1” (X4.38) as well as the position indicators EAZ-256,
EAZ-LCD and EAZ-VFD can display the loading function:
Lobby-Stop If the function “Lobby-Stop” is enabled, the car does not pass the
selectable “Lobby” floor. The car always stops on that floor so employees
in the lobby have the possibility to look in the car.
This function provides the following options:
Enable
The function „Lobby-Stop” is activated in
Enable
.
1
– The loading button can only be operated if the car door is
open, the loading button does not work if the doors are
closed.
– Pressing the loading button again restarts the maximum
loading time.
– Placing a car call terminates the loading function.
Setting Function
0
Load-Sw.Disp deactivated
1
Loading display on FPM X4.38. The display starts flashing
20 seconds before the maximum loading time has elapsed
(see “Display 0 .. 2” on page 122)
.
3
Loading display on FPM X4.38. Illuminates during the last
20 seconds of the maximum loading time
(see “Display 0
.. 2” on page 122)
.
+8
If +8 is added to the set value, the position indicators EAZ-
256, EAZ-LCD and EAZ-VFD will display the text “Loading
activity”.
Setting Function