manualshive.com logo in svg

New lift FST-2, Manual, Page: 10 / 194

Share
Download
New lift FST-2 Manual Download Page 10

2   General Safety Regulations
2.2   Electromagnetic compatibility (EMC)

8

  FST-2_HB.EN12/05

2.2    Electromagnetic compatibility (EMC)

An accredited inspection body has verified that the FST-2-Controller and 
its components comply with the standards, limits and test intensities 
according to EN 12015/1995 and EN 12016/1995.

The FST-2-Controller and its components are:

-

resistant against electrostatic discharges
(EN 61000-4-2/1995)

-

resistant against electrostatic fields
(EN 61000-4-3/1997)

-

resistant against transient disturbances
(EN 61000-4-4/1995)

The field strengths of electromagnetic disturbances radiated by the FST-2-
Controller and its components do not exceed the permitted limits.
(EN 55011/1997)

2.3    Handling electronic components

Leave electronic components in their original packaging until installation.

Touch a grounded piece of metal prior to opening the original packaging to 
prevent damage from static charges.

All bus inputs and outputs not in use must be equipped with a terminal 
resistance (terminator).

Summary of Contents for FST-2



































































































































































































Reviews:

No comments