- 38 -
www.NewLeader.com
(800) 363-1771
307074-AA-I
L4000G4
Figure 5A (uninstalled)
Figure 5B (shown installed)
View from rear of unit�
Figures 5A-5B - Visually make sure insert is centered from side to side in main bin and rear pads are
resting on main bin�
Figure 6
Figure 7
Figure 6 - There must be contact between rear pads and main unit� Check for contact by trying to slide
paper between pads and main bin� If no contact, adjust insert�
Figure 7 - Inside main unit, locate front pads by lifting rubber sealers on front endgate�
Figure 8A
Figure 8B
1� Figures 8A-8B - There must be contact between front pads and main bin� Check for contact by
trying to slide paper between pads and main bin� If no contact, adjust insert�
NOTE: Pry insert at mount brackets if necessary�
Insert Installation Instructions
