- 45 -
NL4258/4330G4 EDGE
www.NewLeader.com
(800) 363-1771
312521-AA-C
The AGCO NL4258G4 and NL4330G4 EDGE are hopper type spreaders intended for spreading free flowing
granular agricultural materials, such as chemical fertilizers, agricultural limestone, and gypsum� They are
intended for mounting on the AGCO RoGator - a high-clearance post-emergence application vehicle�
Each unit is hydraulically powered and provides independent variable speed control for the spinner and
full automatic ground speed control for the conveyor�
The conveyor delivers material to the spinners through an adjustable metering gate at the rear of the
hopper body� An orbital type hydraulic motor mounted to a 6-to-1 ratio spur gear case drives the conveyor
on the NL4330G4� The NL4258G4 utilizes a dual-motor 6-to-1 ratio spur gear case� The conveyor is a
30-inch (76cm) wide #4 belt-over-chain (BOC) type conveyor consisting of parallel strands of pintle chain
joined by crossbars every other link� Moderately oil-resistant (MOR) belting is fastened to the conveyor at
each crossbar�
The spinner assembly has two 24-inch (61cm) diameter dished discs� Each disc has four formed and heat
treated fins that are adjustable to radial angle. The spinner is fully adjustable by means of a rotating handle.
The optional 304 stainless steel
M
ult
A
pplier
may be insterted in the main bin at any time� Inserting the
M
ult
A
pplier
allows for two separate materials to be spread simultaneously� It features a 24-inch (61cm) wide
#4 belt-over-chain type conveyor consisting parallel strands of pintle type chain joined by cross bars every
other link� Moderately oil-resistant belting is fastened to the conveyor at each crossbar� The direct-driven
conveyor is also controlled independently enabling the delivery of material at variable rates through the
adjustable gate at the rear of the hopper body� The hillside divider improves material placement on the
spinner for a more effective spread pattern�
This product is intended for commercial use only�
General Description
