5
PREPARE YOUR TOP THREAD
*
Raise the thread take-up lever to its highest position by turning the handwheel
counterclockwise.
*
Raise the presser foot lifter.
*
Place a spool on the spool pin, with the thread coming off the back of spool.
1. Draw the end of the thread around the
upper thread guide.
2. While holding the thread near the spool,
draw the end of the thread down around
the check spring holder.
3. Firmly draw the thread up from right to
left over the take-up lever, and down into
the take-up lever eye.
4. Draw the thread through the thread guide.
Slide the thread behind the needle bar thread
guide on the left.
5. Thread the needle from front to back, or use a
needle threader.
1
3
2
5
4
