New Holland Workmaster 50, Service Manual

Page: 160 / 1067

Transmission - Mechanical transmission internal components
Transmission internal parts - Install Transmission rails and fork
To install the shift rail and shift forks follow the proce-
dure as mentioned below.
1. Insert the bottom shift rail, (1) , and 1st/2nd gearshift
fork. Insert the snap ring, (2) , on the bottom shift rail
and ensure it sits on the seat in housing.
GNIL14TR04227AB
1
2. The Hi/low shift rail, (1) , shift fork, and shift gate should
be installed after the pinion and crown settings.
NOTE: Keep grooves of rails upward to make easy fitment
of balls and springs.
GNIL14TR04228AB
2
3. Transmission shift rails can be identified by referring to
Figure 3 .To fit rails 1st/2nd (1) and 3rd/4th (2) rails are
similar. After fitting range shaft and drive shaft fit fork
for 3rd/4th and insert reverse rail
(3) , passing through
fork of 3rd/4th gear.
200900174
3
47866583_ 02/12/2015
21.3 [21.140] / 3