New Holland Workmaster 50, Operator'S Manual

Page: 45 / 184

3 - CONTROLS AND INSTRUMENTS
3 - CONTROLS AND INSTRUMENTS ###_3_###
ACCESS TO OPERATOR'S PLATFORM
Before operating
WARNING
Improper operation or service of this machine
can result in an accident.
Read and understand the SAFETY INFORMA-
TION Section before you operate or service
the machine.
Failure to comply could result in death or se-
rious injury.
W0266A
Read this section thoroughly. The controls and instru-
ments section details the location and operation of the var-
ious instruments, switches, and controls on your tractor.
Even if you operate other tractors, you should thoroughly
read this section of the manual and ensure that you are
familiar with the location and function of all the features of
the tractor.
Do not start the engine, or attempt to drive or operate the
tractor until you are fully familiar with all the controls. It
is too late to learn once the tractor is moving. If you have
any questions about any aspect of operation of the tractor,
consult your authorized dealer.
Pay particular attention to the recommendations for run-
ning-in to ensure that your tractor will give the long and
dependable service for which it was designed.
OPERATOR'S SEAT
Operator's seat
Your tractor is equipped with an adjustable seat, (1) . Be-
fore operating the tractor, it is important to adjust the seat
to the most comfortable position. See the following text
and illustrations for details.
Operator's seat adjustment
To move the seat forward and rearward, raise the lever,
(2) , and position the seat to a comfortable position.
Do not start the engine or attempt to drive or operate the
tractor until you are fully familiar with all the controls. It
is too late to learn once the tractor is moving. If you have
any questions about any aspect of operation of the tractor,
consult your authorized dealer.
NHIL13CT00714AA
1
3-1