New Holland WORKMASTER 35, Operator'S Manual

Page: 63 / 180

3 - CONTROLS AND INSTRUMENTS
Mid PTO lever
The mid PTO lever (1) is located on the left-hand control
pod.
NOTE: The mid PTO is optional equipment on HST and
gear model tractors.
To engage the mid PTO, pull up on the mid PTO lever,
push down on the PTO switch and turn the switch to the
"ON" position.
NOTE: When the mid PTO is engaged the rear PTO will
also be engaged. The mid PTO cannot be engaged sep-
arately.
To disengage the mid PTO, push down on the PTO switch
and push the mid PTO lever down to the "OFF" position..
NOTE: To start the engine the mid PTO lever must be in
the down (disengaged) position and the PTO switch in the
"OFF" position.
NHIL12CT00772AA
1
3-17