New Holland WORKMASTER 35, Operator'S Manual

Page: 146 / 180

7 - MAINTENANCE
Roll Over Protective Structure (ROPS) - Possible damage
If the unit has rolled over or the ROPS has been in some
other type of accident (such as hitting an overhead object
during transport), the ROPS must be replaced to retain the
best protection.
Following an accident, check the ROPS, the operator's
seat, and the seat belt and seat belt mountings for pos-
sible damage. Before operating the machine, replace all
damaged parts.
NOTICE: Do not attempt to weld or straighten the ROPS.
WARNING
Always pull from the drawbar. DO NOT attach chains
or ropes to the ROPS for pulling purposes, as the ma-
chine could tip over . When driving through door open-
ings or under low overhead objects, make sure there is
sufficient clearance for ROPS. Failure to comply could
result in death or serious injury.
M1415
WARNING
If the ROPS is removed or replaced, install the proper
hardware and tighten to correct torque listed in mainte-
nance section of operator’s manual. Failure to comply
could result in death or serious injury.
M1462
WARNING
Always use the seat belt with a safety cab or Roll Over
Protective Structure (ROPS) frame installed. If tractor
is not equipped with a safety cab or ROPS, do not use
a seatbelt. Failure to comply could result in death or
serious injury.
B050A
7-38