7 - MAINTENANCE
Engine cooling system - Check
Cooling system
WARNING
Hot liquid under pressure!
Scalding can result from fast removal of the radiator cap. Check and service the engine cooling sys-
tem according to the maintenance instructions in this manual.
Failure to comply could result in death or serious injury.
W0163A
The tractor engine must operate at the correct temperature to obtain maximum efficiency and service life. This is
dependent on the cooling system.
Only check the cooling system when the engine is “OFF” and the cooling system is cool. Never add coolant to a
hot cooling system. Never remove the radiator cap when the cooling system is hot.
Always fill the system with a 50/50 solution of ethylene
glycol antifreeze and water.
Checking the coolant level
1. Visually inspect the coolant level in the coolant recov-
ery reservoir
(1)
the coolant level should be between
the "LOW" and "FULL" lines located on the side of the
reservoir.
2. If the coolant level is not between the "LOW" and
"FULL" lines, add coolant as necessary. The cooling
system already contains antifreeze, add only antifreeze
solution of the correct water/antifreeze mixture. Pure
water will dilute the solution and weaken its protection.
NHIL17CT01441AA
1
7-10
Summary of Contents for Workmaster 25 Tier 4B
