New Holland T4.105F, Operator'S Manual

Page: 17 / 248

1 - GENERAL INFORMATION
Identification plates
Serial numbers identify the tractor and its main components. The identification data must be supplied by the dealer
for requests for spare parts or service operations. Identification data is of fundamental importance in the event of theft
of the tractor. The location of the various identification data is shown below.
(A)
FRAME IDENTIFICATION DATA PLATE
The tractor’s frame number is stamped over the front sup-
port. It gives the safety frame identification data.
(B)
ROPS FRAME IDENTIFICATION DATA PLATE
The plate gives the identification data for the rops frame
fitted on the machine.
(C)
FRAME AND ENGINE TYPE IDENTIFICATION SUM-
MARY DATA PLATE
The plate groups the identification data with your ma-
chine’s frame number and engine number.
(D)
STANDARD FRONT AXLE IDENTIFICATION PLATE
The plate is located on the component and gives the iden-
tification data for the axle fitted on the machine.
(E)
ENGINE IDENTIFICATION DATA PLATE
The plate with the engine data installed on the tractor is
fitted on the right or left hand side of the engine (depend-
ing on the model).
MOIL13TR00766CA
1
1-9