New Holland T4.105, Service Manual

Page: 32 / 81

Engine - Engine and crankcase
Engine - Remove
T4.105 with cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.105 less cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.115 with cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.115 less cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.75 with cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.75 less cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.85 with cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.85 less cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.95 with cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
T4.95 less cab, with mechanical or power shuttle transmission [ZxJT0xxxx]
1. Remove the engine hood (1) , as indicated in Hood -
Remove (90.100) .
2. Remove the battery, as described in Battery - Remove
(55.302) .
3. Remove the tank, as described in Fuel tank - Remove
(10.216) .
4. Loosen the retaining bolts (1) . Remove the front wheel
fenders (2) (if any). Do this on both sides.
WLAPL4S10C104A
1
5. Recover the refrigerant from the system via the fittings
(1) and (2) using the specific tool 380000315 . Detach
the two lines by disconnecting any support straps.
WLAPL4S10C106AA
2
6. Then detach the lower pipe (3) on the condenser (1) .
Free the pipe from any straps or clamps. Disconnect
the sensor
(2) . Place the pipe on the cab.
WLAPL4S10C107A
3
47803847 15/12/2014
10.1 [10.001] / 3