New Holland Speedrower 200, Service Manual

Page: 64 / 81

Engine - Engine and crankcase
Engine - Install
WARNING
Heavy parts!
Support designated component(s) with adequate lifting equipment.
Failure to comply could result in death or serious injury.
W1024A
1. Align holes in engine supports and install four 5/8 in. x
3–1/2 in bolts with large washers (1) down through en-
gine mounts and install lock nuts. Tighten to 149 N·m
( 110 lb ft )
76075209
1
2. Install four flange bolts and lock washers (1) from radi-
ator side of fan and attach to drive sheave.
50050774
2
3. With adequate support provided for the pumps, care-
fully move transmission and header drive pump into
mounting position. Install all flange bolts
(1) that se-
cure the pumps to cover plate (2) .
NOTE: Use L
OCTITE
® 598 U
LTRA
B
LACK
silicon sealant on
mating surfaces before joining pumps to cover plate.
4. Install and tighten drain plug (3) to cover plate.
76077321
3
47698329 14/04/2014
10.1 [10.001] / 12