9 - ACCESSORIES
Standard buckets with Hydraulic pin grabber coupler
NOTICE:
all attachment shown on this manual are exclusive to the North American Market. To all other markets
contact your authorized NEW HOLLAND CONSTRUCTION dealer, before purchasing an attachment.
NOTE:
contact your authorized NEW HOLLAND CONSTRUCTION dealer, before purchasing an attachment.
The data shown below are referred to working operation with the dozer blade up and the
117 kg
(
257.9 lb
) counter-
weight.
For cab configuration:
•
1.12 m
(
44.09 in
) arm, minimum lift value:
260 kg
(
573.20 lb
).
•
1.35 m
(
53.15 in
) arm, minimum lift value:
240 kg
(
529.11 lb
).
For canopy configuration:
•
1.12 m
(
44.09 in
) arm, minimum lift value:
230 kg
(
507.06 lb
).
•
1.35 m
(
53.15 in
) arm, minimum lift value:
210 kg
(
462.97 lb
).
Standard buckets with Hydraulic pin grabber coupler application as function of the arm (for
cab version)
General purpose buckets
Arm
Capacity
ISO 7451
(Heaped)
Width
Mass
1.12 m
(
44.09 in
)
1.35 m
(
53.15 in
)
0.037 m³
(
0.048 yd³
)
305 mm
(
12 in
)
55 kg
(
121.3 lb
)
●
●
0.057 m³
(
0.075 yd³
)
457 mm
(
18 in
)
70 kg
(
154.3 lb
)
●
●
0.076 m³
(
0.099 yd³
)
610 mm
(
24 in
)
84 kg
(
185.2 lb
)
● (**)
▲ (**)
Standard buckets with Hydraulic pin grabber coupler application as function of the arm (for
canopy version)
General purpose buckets
Arm
Capacity
ISO 7451
(Heaped)
Width
Mass
1.12 m
(
44.09 in
)
1.35 m
(
53.15 in
)
0.037 m³
(
0.048 yd³
)
305 mm
(
12 in
)
55 kg
(
121.3 lb
)
●
●
0.057 m³
(
0.075 yd³
)
457 mm
(
18 in
)
70 kg
(
154.3 lb
)
●
● (**)
0.076 m³
(
0.099 yd³
)
610 mm
(
24 in
)
84 kg
(
185.2 lb
)
■ (**)
♦ (**)
● Density of material up to 1.6 t/m
3
▲ Density of material from 1.4 t/m
3
to 1.6 t/m
3
■ Density of material from 1.2 t/m
3
to 1.4 t/m
3
♦ Density of material under 1.2 t/m
3
(*) With this bucket, to improve digging performance and stability, the additional counterweight coupled with the stan-
dard counterweight is recommended.
(**) With this bucket, to improve digging performance and stability the additional counterweight must be coupled with
the standard counterweight. Do not couple the additional counterweight when the heavy counterweight is installed
on the machine.
NOTICE:
pay particular attention when swinging the boom to the left-hand side: the attachment may contact the
cab/canopy.
9-4
Summary of Contents for E26C
