New Holland E26C, Operator'S Manual

Page: 182 / 282

6 - MAINTENANCE
Tightening torques
Check the tightening torques every 250 h (after the break-in period).
Component
Bolt size
Tightening torque
Travel motor M12 x 1.75 88 – 113 N·m ( 64.9 – 83.3 lb ft )
Sprocket M12 x 1.75 109 – 132 N·m ( 80.4 – 97.4 lb ft )
Counterweight
M20 x 2.5
470 – 635 N·m ( 346.7 – 468.4 lb ft )
Additional counterweight
M24 x 3.0
833.9 – 1128.2 N·m ( 615.1 – 832.1 lb ft )
Swing bearing M12 x 1.75 109 – 132 N·m ( 80.4 – 97.4 lb ft )
Swing unit M16 x 2.0 247.4 – 334.7 N·m ( 182.5 – 246.9 lb ft )
Engine mounting bolt (front)
M12 x 1.75
118 – 137 N·m ( 87 – 101 lb ft )
Engine mounting bolt (front bracket) M10 x 1.25 58 – 88 N·m ( 43 – 65 lb ft )
Engine mounting bolt (coupling) M12 x 1.75 118 – 137 N·m ( 87 – 101 lb ft )
Main pump M12 x 1.75 96.8 – 145.2 N·m ( 71.4 – 107.1 lb ft )
Hydraulic swivel
M10 x 1.5
54.4 – 81.6 N·m ( 40.1 – 60.2 lb ft )
Operator’s seat (bolt) M8 x 1.25 20 – 30 N·m ( 15 – 22.1 lb ft )
6-40