3 - CONTROLS AND INSTRUMENTS
ISO control pattern lift arm and bucket controls
Lift arm and bucket controls
931007524
1
The right-hand control lever operates the lift arm and bucket.
Lift arm raise and lower control.
• Pull back on the right-hand control lever to raise (up) the lift arm.
• Push the right-hand control lever forward to lower (down) the lift arm.
• The lift arm spool is equipped with a detent FLOAT circuit. In this detent position the lift arm will float over changing
ground contour and the lever will remain in this position until pulled back toward the up stroke slightly.
Engage the float feature:
Press the float button on the right-hand control lever and push the lever partially forward. If the operator has the
right-hand control lever already partially in the down stroke position and then presses the float button, the float
feature will engage.
Disengage the float feature:
Pull back on the right-hand control lever out of the detent position.
Bucket dump and curl control.
• Pivot the right-hand control lever inward (down) and the bucket will roll back (curl).
• Pivot the right-hand control lever outward (up) and the bucket will dump.
NOTE:
There is no detent or float position on the bucket dump and curl circuit.
3-22
Summary of Contents for 200 Series
