Part # Description
Quantity
Assembly & Mounting Instructions
Yorkshire Arbor
- Read instructions through carefully before
beginning assembly.
- Identify each component from material list.
- When assembling components, place on a
non-abrasive surface to avoid scratches.
- Do not use excessive force when assembling
components.
- In the event of missing or defective parts,
please call our customer service department
at
1-800-282-9346 (ext.#20)
.
General Information:
- Cordless drill & #2 Robertson bit
- Tape measure
- Level
- Shovel
Tools Required:
1 5” sq. x 84”
(Std)
or 120”
(Pro)
Posts
2 84” Long molded arches
3 5” sq. Locking arch/post inserts
4 5” sq. Trim caps
5 1 3/4” x 3 1/2” Pergola end caps
6 2” x 3 1/2” x 31 3/4” Bottom rails
7 1 3/4” sq. x 41 5/8” Middle rails
8 41 5/8” Long curved top rails
9 1 3/4” x 3 1/2” x 46 1/2” Filters
10 7/8” x 1 1/2” x 56” Spindles
7/8” x 1 1/2” x 53 1/2” Spindles
7/8” x 1 1/2” x 52” Spindles
7/8” x 1 1/2” x 51” Spindles
11 Keystones (base & locking top)
12 Hardware kit (2 bags):
1 1/2 oz. tubes of glue
2” x 3 1/2” Mounting brackets
3/4” Stainless screws
4” Stainless screws
Cap/washer assembly
(tan model only)
4
2
4
4
20
2
4
2
10
4
4
4
2
2
1
2
24
10
26
- 5” sq. treated wood posts.
- Pre-mix concrete
(recommend for added strength &
stability, especially when attaching a gate).
Materials Included:
87 1/2”
49”
Materials (Optional):
Part 1
Part 2
Part 3
Part 4
Part 6
(Fig. 1)
Product dimensions & part
identification.
(Fig. 2)
Post layout for installation.
32”
Opening
59”
95 1/2”
49”
Part 8
Part 9
Part 10
Part 7
Ver 1.07
Part 11
42”
Part 5
58 1/2”
84”
(Fig. 3)
Cap/washer assembly.