background image

1.

Arches (2) 

10747-1

2.

Arch Rafters 

(5)

 

- 10756

3.

Post Caps 

(4)

 - 

10748-1

4.

Left Posts 

(2)

 - 

10749-1

5.

Right Posts 

(2)

 

-

 10750-1

6.

Side Panel Top Horizontal Rails 

(2)

 

-

 10751-1

7.

Side Panel Bent Vertical Spindles 

(4)  

Length 56.5 in. (144 cm) - 10752-1

8.

Side Panel Middle Straight Vertical Spindles 

(2)

 

Length  55.4 in. (141 cm) -10753-1

9.

Side Panel Middle Horizontal Rail 

(2)

 

- 10754-1

10.

Side Panel Bottom Horizontal Rail 

(2)

 

10755-1

11.

Ground 

Mounting Extensions 

(4)

 - 

10845

12.

1 1/4 in (

32 mm)

 Self Aug

u

ring Screws (

34)

 

20047

13.

5/8 in (

16 mm

) Self Aug

u

ring Screws (

8)

 - 

20016 

Tools You Will Need

• Cordless Drill
• Level
• Stool or Short Ladder
• Shovel
• Cement (For Installation)

Assembly Time

• Approximately 30 minutes 

(2 People)

General Information

   

Read Instructions through carefully before beginning assembly.

    •  When assembling components, place on a non-abrasive surface

         (i.e. shipping box) 

to avoid scratching. 

• We recommend an area approx 10 ft. x 8 ft. 

(3 m x 2.4 m) 

for unobstructed assembling.

• You should not need to use excessive force when assembling components.

Please read through before starting assembly.

IMPORTANT:  CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS.

Check Box for These Contents 

In the event of missing or defective parts please call our customer service dept. at 

1 800 282 9346

 (Mon. to Fri. 8:00 AM to 4:00 PM EST).

(UK Tel: 

(44) 2038 687160 

(Mon. to Fri.  1:00 PM to 10:00 PM GMT).

ASSEMBLY INSTRUCTIONS

The London Arbor / Arch

1

Not to Scale

7

6

5

4

2

3

1

42 in

(107 cm)

45 in

(114 cm)

18 in

(46 cm)

21 in

(53 cm)

83.5 in

(112 cm)

78.5 in

(199 cm)

8 in

 (20 cm)

56 in

(142 cm)

8

9

10

11

12

V3.

2

/

072717

13

www.newenglandarbors.com

www.newenglandarbors.co.uk

Summary of Contents for London

Page 1: ... Read Instructions through carefully before beginning assembly When assembling components place on a non abrasive surface i e shipping box to avoid scratching We recommend an area approx 10 ft x 8 ft 3mx2 4m for unobstructed assembling You should not need to use excessive force when assembling components Please read through before starting assembly IMPORTANT CHECK THE INSIDE OF YOUR POSTS FOR ALL ...

Page 2: ...BENT into place slightly longer than middle vertical spindle Slide the Side Panel Middle Horizontal Rail over the three vertical spindles to about the middle of the vertical spindles Position the Side Panel Top Horizontal Rail and insert the Middle Vertical Spindle Tension bend into place the two outer vertical spindles The assembled side panel will need to be held together until it is inserted in...

Page 3: ...t caps on top of posts Connect Arch System to Side Panels 6 7 8 9 Layout one LEFT post as identified horizontally with holes facing up and insert the assembled side panel by aligning the horizontal rails with the holes on the post Layout one RIGHT post as identified horizontally with holes facing up and insert the assembled side panel and post into Fasten the side panel to the posts by using 1 1 4...

Page 4: ... arbor and level over the holes with bricks stones or blocks of wood under the bottom rail of the side panel The post bottoms should insert themselves approximately 1 2 5 cm into the concrete Allow the concrete to set 1 2 3 B Into Earth With Concrete Footing A 1 10 6 2 Level Level Slide the four ground mounting extension into the bottom of each posts until it bottoms out and secure with two 5 8 16...

Reviews: