- 34 -
Periodic Inspection
•
Contact your New Cosmos representative for inspection more than once every six
months.
•
Contact your New Cosmos representative for a periodic inspection, including a
sensor calibration and filter replacement more than once a year.
Maintenance
•
When the Multi-gas Detector is dirty, wipe with a dry soft cloth or tightly squeezed
wet cloth. Do not use cleaning agents or alcohol to clean.
Replacement Parts
Name Part
Code Reference
FE-128 Filter Element
59160104
Replace at least once a year or when the filter
element is dirty or wet (see “
Replacement of
Filter Element
” on page 29)
Battery Cover (with O-ring)
59460000
Replace when the battery cover is deformed
(see “
Battery Replacement
” on page 28)
FE-129 Filter for Combustible
Gas Sensor
59160105
FE-130 Filter for Carbon
Monoxide Sensor
59160106
Replace every six months (see “
Replacement
of Filter for Each Sensor
” on page 31)
Sensor Packing
20596510
Replace when the sensor packing is damaged
or deformed
Recommended sensor replacement interval is every 2 year to
maintain accuracy. Replace a sensor every 2 years, as it may
affect the detection performance after 2 years. However,
replacement interval may vary depending on the conditions of use
and environment. Particularly in case of dropping, exposure to
water, use at high temperature/humidity or exposure to high
concentration gas or toxic gas, contact your New Cosmos
representative for a maintenance check.
WARNING
- 33 -
6. Maintenance Check
This Multi-gas Detector is precision equipment. The following maintenance is required to
maintain performance and safety. In the event of a violation of “
Safe Operation
”
instructions on page 4 such as impact shock from dropping or exposure to water, and
improper use as described in “
Specifications
” on page 37 such as detecting gas
concentration exceeding the detection range or use in temperature and humidity
exceeding the use range, request a paid inspection with a briefing.
Daily Check
Check Item
Description
LCD
Check if LCD is not damaged. (see “
Turn ON the Power
” on page 9)
Alarm Function
Check the buzzer sound, flashing alarm lamp, and vibration alarm
function. (see “
Alarm Test
” on page 18)
Filter Element
If the filter element is dirty or wet, replace with a new filter. (see
“
Replacement of Filter Element
” on page 29)
Battery Level
Check the remaining battery level in the bottom left of the LCD.
When the battery level is low, replace with a new battery. (see
“
Battery Replacement
” on page 28)
[Battery Level] HIGH . . . . . . . . . . . . . . . LOW Replace
Blinking
(Battery is dead)
Since the low temperature may shorten the
battery life, keep an extra battery or replace a
battery before it dies.
NOTE
