Rev. 00 of 12.06.09
13/18
Ca p.5
– A PP LI CATIONS
5 . 1
– T h e r a p y s e s s i o n s
Apply the LASER therapy according to medical prescriptions
.
Applications are done every other day or 2-3 days. Use the most suitable
program for the patient until the ailment disappears or considerably
decreases.
5 . 2
– A d j u s t i n g e m i s s i o n p o w e r o u t p u t
Intensity adjustment is a main component for the good result of the therapy.
It differs based on the type of program being used, the duration of the
application and the characteristics of the patient. The intensity can be
changed during the program to increase its affects. It can also be decreased in
case of overheating or if pain is felt.
The device is endowed with a special function that allows to have safer
treatments: it’s the “Maximum power output”, you can find it in the
configuration page, and it allows to set the maximum power output of the
device. Consequently during work phase the sum of the power of the
different sources cannot exceed the value set during configuration, therefore
avoiding dangerous power levels during treatment.
If inadvertently the operator tries to set higher values, the device
automatically limits itself.
The device shows that the threshold has been passed in two ways: if the
operator is adjusting the duty cycle, the device limits the power bar and it get
Summary of Contents for Hi-Laser Beta LASER
Page 2: ...Rev 00 of 14 01 10 2 24...
