DAW / CONSOLE CONTROL Screen
The Monitor Panel has 18 dedicated buttons with fixed functions, plus 4
'soft' rotary encoders whose function changes depending on what is
selected elsewhere on the console.
For the purposes of this manual, they are numbered (from left to right) 1
to 4.
Each of these 4 free-running encoders has a push On/Off switch
associated with the rotary control.
None of these four push-buttons will have a function unless either you are
in DAW mode, and control has been established between the DAW and
Genesys, or you are set to controlling the EQ, Dynamics or 2T.
EQ
Please see the section on EQ on page 99.
DYN
Please see section on DYN on page 102.
2T
The screen on the left shows the page that will open when working in
Group mode
.
u
It is possible to turn each 2T On and Off via this page by clicking
underneath the relevant 2T, 2T output ON/OFF button.
u
Each 2T also has +/-10 dB of trim available, which is set using the
scroll arrows next to each Trim field.
u
It is also possible to set the overall 2T output level.
This ranges from –∞ to 0dB.
This screen will also show whether you are working in
Group mode
or
5.1 mode
Mode (displayed left) and whether the 2Ts are fed
Pre
- or
Post
-
fader (displayed right).
Control of the 2Trk functions is only via the software screen. Control with
the four Monitor Panel encoders (located at the bottom of the panel) will
be implemented in a future software release.
- 84 -
