CONTROL ROOM MONITOR Section
Sets the monitoring and controls the various sources sent to the
loudspeakers.
AUX 1 – 6
u
Lights yellow when selected and will send that Aux outputs to the
speakers.
Aux 1-4 to MON L & R, Aux 5 and 6 L & R to MON L & R respectively.
CUE 1
&
CUE 2
u
When selected will light yellow and send that Cue outputs to the
loudspeakers.
MIX
u
When selected will light yellow and send the Main buss output to the
speakers.
8T
u
Lights yellow when selected, and sends the 8T mix to the
loudspeakers.
The setup to determine which 8T goes to which loudspeaker is done by
either putting the Monitor Panel into Master SEL Mode or from the on-
screen Settings Setup page and using the 8T to
MON
matrix.
2T
u
Lights yellow and selects the
2T
mixer output to the main monitoring.
Will only work if
INT
is also selected, and is always interlocked with
8T
even when in Sum mode.
In non-
SUM
mode, all the above buttons above will be interlocked.
In
SUM
mode, any combination of the above can be heard.
NB:
The AUX, CUE, MIX, 2T and 8T buttons form the internal monitor
- 72 -
