PROCESSING Section – EQ, DYN, INS
If the optional EQ and Dynamics processing cassettes are present, it is
possible to place the EQ and/or Dynamics on either the Channel or
Monitor path (it is not possible to split the Dynamics elements so the
Compressor and Gate are split between the two paths).
In normal operation, the
DYN
and
EQ
buttons work as On/Off for the
relevant process, regardless of whether that element is on the Channel or
Monitor path.
If
EQ
or
DYN
has been placed on the Monitor path, then the On or Off
state of the selected process will be displayed on the
TO MON
leds at the
bottom of the strip.
Secondly, the order of the processing elements can be interrogated.
ORD (Interrogate)
u
Press the
ORD
button once and the four leds will light in turn to reflect
the order of processing on the
Channel
path.
u
Press the
ORD
button again and the four leds will light in turn to
reflect the order of processing on the
Monitor
path.
Master SEL mode on the PROCESSING section
To Enter and Exit Master SEL Mode on the Channel Strip
u
Press and hold down
LOCK
on the Main Monitor Panel, then press
RTE
SEL
.
All of the Channel Strip SEL leds will flash. Most of the strip controls will
have their functionality blocked out, apart from those indicated in white,
left.
u
Make any changes.
u
Press the
RTE SEL
button to save your changes and exit
Master SEL
mode.
To Allocate Processing Elements Across Channel and Monitor Paths
u
Enter
Master SEL
mode.
u
Pressing the
EQ
button will toggle between the lighting the adjacent
LED
to indicate the EQ is in the Channel path, or lighting the
EQ
LED in the
TO
MON
section, to indicate the EQ is in the Monitor path.
The
DYN
,
INS1
and
INS2
buttons work in the same way.
u
Press the
RTE SEL
button to save your changes and exit
Master SEL
mode.
To Set the Order of Processing on the Channel and Monitor Paths
u
Enter
Master SEL
mode.
u
Press
ORD
(the
CH
LED will light).
The process LED(s) will flash for any elements that are in the Channel
path.
u
Press the buttons in the order you wish the processing to appear.
u
Press
ORD
again (the
MON
LED will light if processing is in the
monitor path already).
The process LED(s) will flash for any elements that are in the Monitor
path.
u
Press the buttons in the order you wish the processing to appear.
u
Press the
RTE SEL
button to save your changes and exit
Master SEL
mode.
- 47 -
If the EQ or Dynamics cassettes
are not fitted on the relevant
channel strip, the
EQ
and
DYN
leds will not light and these
buttons will not function.
INS1
And
INS2
are always
available.
