![background image](http://html1.mh-extra.com/html/neuropace/pdms-4340/pdms-4340_user-programming-manual_1676339041.webp)
Tablet Instructions
37
RNS
®
System Programming Manual
Program the Neurostimulator with the New Settings
The new settings are not sent to the neurostimulator until you complete this step.
Note: ECoG capture triggers are inactive during programming. Programming clears activity
information and ECoGs stored in the neurostimulator. If there is any new information, be sure
to interrogate the neurostimulator prior to programming.
7. Select
R
EVIEW
&
P
ROGRAM
at upper right (
).
8. On the
R
EVIEW
screen, if you are satisfied with the new or changed settings, place the wand
within approximately 1 inch of the neurostimulator and select
C
ONFIRM
P
ROGRAMMING
. If not
satisfied, select
C
ANCEL
to return to the previous screen.
The
P
ROGRAMMING NEUROSTIMULATOR
dialog shows programming progress until complete.
Summary of Contents for PDMS 4340
Page 119: ......