![background image](http://html1.mh-extra.com/html/neuropace/pdms-4340/pdms-4340_user-programming-manual_1676339037.webp)
Tablet Instructions
33
RNS
®
System Programming Manual
corresponding detection settings. When the montage is altered, the detection settings created
with the previous montage are discarded and the detection settings must be reprogrammed.
Identifying Ports, Leads and Electrodes on the Neurostimulator
The figure below identifies neurostimulator
P
ORT
#1
and
P
ORT
#2
with their leads extending out of the
ports.
Figure 22 RNS
®
Neurostimulator port #1 and #2 locations. Port #1 is closer to the center of the neurostimulator and port #2
is closer to the edge.
For both depth leads and cortical strip leads, the electrodes are numbered 1 through 4 starting from
the distal end of the lead.
Figure 23 For both lead types, electrodes are numbered 1 through 4. Electrode 1 is most distal.
Summary of Contents for PDMS 4340
Page 119: ......